Plumbing Services in Kansas City – Does your hot water tank run out of hot water faster than it once did? Do you ever get stuck in a cold shower on a cold day? You may need professional plumbing services in Kansas City, or you may just need to do a little maintenance. Regular maintenance is the best way to avoid unnecessary water heater repair in Kansas City.
Step #1 – Inspect – Plumbing Services in Kansas City
The best place to start maintenance is a preliminary inspection of your water heater. If you don’t know much about water heaters, take this opportunity to learn. Locate and identify the following items:
- Water inlet
- Water outlet
- Anode rods
- Gas supply (for gas water heaters)
- Electrical connections (for both gas and electric water heaters)
- The outlet valve at the bottom of the tank.
- Vent (for gas water heaters)
Inspect all water lines, gas lines, and electrical connections. If anything seems out of place, call for professional help. Inspect the tank for evidence of rust. Minor surface rust is typical in certain climates, but severe rust needs to be treated quickly, or it may signal that you need a completely new water heater.
Test the Pressure Relief Valve
You should also turn off your heater, let it cool, and test the pressure relief valve. Place a bucket under the outlet and pull the lever on the valve. If water runs out, everything is fine. If no water comes out or it comes out very slowly, the valve needs to be replaced.
Inspect the Anode Rods
While your heater is still off and cool, turn off the water inlet and drain ¼ to ½ of the tank into a bucket through the outlet valve on the bottom of the take. Next, loosen and unscrew the anode rods from the top of the tank. If the rods show signs of heavy corrosion, they need to be replaced,
Step #2 – Drain and Flush – Plumbing Services in Kansas City
After your inspection, drain your water heater completely through the outlet valve on the bottom of the tank. Make sure the heater is turned off, cool, and the water inlet is shut. Connect a hose to the outlet valve and direct the water outside your home if possible.
Once the tank has been drained, turn the water supply back on and flush the tank until the water runs clear.
Step #3 – Install or Replace Insulation – Plumbing Services in Kansas City
Your water heater tank and the outlet pipe should be wrapped in insulation. If the insulation is damaged or missing, install new insulation.
Fix My Water Heater in Kansas City!
If this didn’t resolve your water heater problem or if you don’t feel comfortable doing maintenance on your own, don’t worry! We are here to help. Call us today at (816) 768-0700.
Do You Need Plumbing Services in Kansas City?
At Mac Wilson, our team of professional, licensed technicians can resolve any plumbing or water pressure issue you might have. We can replace a broken faucet, do water heater repair in Kansas City, replace your supply lines, or help with sewer problems in Kansas City.
If you need the best sewer repair in Kansas City or the best sewer replacement company in Kansas City, contact us today!
Give us a call at (816) 768-0700, or contact us online to set up a time for us to visit your home.
